TORK CRAFT Polisher 1200w Wool Bonnet 180mm With 4m Cord 6 Months Warranty

Features

• Professionally manufactured: Designed for automotive paint care and detailing industries.
• Variable speed dial: Allows polishing speed to be adjusted according to the panel, compound and finish required.
• Rotary polishing action: Helps work compound into the paint surface to reduce marks and restore gloss.
• Multiple grip positions: Allows better control when working at different angles around a vehicle or panel.
• High torque gear system: Two-level reduction gear system supports controlled polishing performance.
• Wool bonnet and backing pad: Supplied with practical accessories for polishing work.
• Longer power cord: 4m cord improves mobility around the work area.

Benefits

• Improves paint appearance: Helps reduce dullness, swirl marks, fine scratches, water spots and oxidation on suitable painted surfaces.
• Better user control: Variable speed lets the user start slowly and work the polish more carefully.
• More comfortable polishing: Ergonomic hand positions help reduce strain during extended use.
• Good working reach: The 4m cord makes it easier to move around panels and vehicles.
• Ready for polishing work: Supplied with wool bonnet buff and backing pad to get started with suitable compound.

Application

• Automotive paint care and detailing
• Polishing clear-coat paint surfaces
• Reducing swirl marks and fine scratches
• Removing dullness and improving gloss
• Working out sanding marks after fine sanding up to P1500 grit
• Polishing panels after spray-finishing preparation
• General vehicle, panel and workshop polishing applications

Steps to take when polishing a panel:

1. Preparing the panel:

• Sometimes a panel has fine over-spray left from spraying the clear-coat. This needs to be removed by lightly sanding with a fine abrasive paper. All over-spray need to be sanded out up to P1500 grit.
• The panel should be washed when all spray-finishing defects have been removed. Any dirt particles could cause scratch marks when polishing.
• Tight curves and ends of the panel should be masked-off to prevent the effects caused by point pressure. The polisher should always be used on flat surfaces.

2. Applying the polishing compound:

• A five rand coin amount of polishing compound should be applied to the buff. Switch the polisher to it's lowest speed setting.
• Switch on the polisher and gradually spread the polishing compound over the panel.
• Keep moving the polisher on the panel to have as little amount of pressure and friction.
• The polishing compound will remove the scratch marks caused by the P1500 sand paper and it will bring out an impressive gloss finish.
• Remove the masking from the panels and apply the polishing compound to a microfiber cloth. Hand polish (by moving your hand in a small circular motion) the tight curves and ends in the panels until the same finish is achieved as from the polisher.

3. Wash the panel when finished:

• Wash the panel after polishing to remove any residue from the polishing compound.

Specifications

In the box:

• Tork Craft POL02 1200W Polisher
• Ø180mm wool bonnet buff
• Backing pad