TORK CRAFT Cutting Disc Steel 400 X 3.0 X 25.4

Features

• Large 400 mm diameter for deep, one-pass cuts on heavy stock.
• 3.0 mm thickness — proven balance of cutting speed, edge stability and life.
• 25.4 mm arbor (1") for chop saws/cut-off saws.
• Reinforced Type 41 flat cut-off wheel for straight tracking.
• Steel-focused bond for general fabrication and workshop use.

Benefits

• Clean, fast cuts reduce burrs and post-cut finishing.
• Stable feel through the kerf for better accuracy and user control.
• Lower cost per cut thanks to durable bond and consistent wear.

Extra Information

• Ideal on mild steel, angle/profile, tube and plate. For stainless, use an INOX-rated disc.
• Use only for straight cutting; do not side-grind with cut-off wheels.
• Best results at rated speed with steady feed pressure—let the wheel do the work.

Specifications

Safety

• Always use the saw’s guard and wear eye, face, hearing and hand protection.
• Confirm the machine’s no-load RPM does not exceed the disc rating.
• Mount securely and perform a brief no-load spin-up before cutting.
• Do not twist or bind the wheel; maintain a straight, steady feed.
• Discard damaged, dropped or expired discs immediately.