-17 %
Out Of Stock
AIRCRAFT Compressor With Airbrush Kit And Hose
This offer ends in:
Day
Hour
Min
Sec
R 2,011.06
R 2,421.00
Ex VAT: R 1,748.75
- Stock: Out Of Stock
- MPN: SG COMP04K
- Weight: 3.98kg
- Dimensions: 345.00mm x 162.00mm x 162.00mm
- SKU: SG COMP04K
- UPC: 6009515814144
For 50 or more items, click to quote
Compressor & Airbrush kit
This quality airbrush set and the high-performance, oil-free piston compressor COMP04 offers airbrush specialists complete flexibility in all areas. Neatly equipped with a filter/water trap and regulator, making this setup a convenient option for everyone.
We offer a vast range of accessories, hoses and range of airbrushes to enhance this kit even further. A quiet running airbrush compressor with auto stop function - meaning it only runs while you are using the airbrush.
Supplied as seen in the photo with a suction feed airbrush.
Features:
-
Portable
& lightweight. - Thermally protected.
- Low noise.
- Auto stop.
- Pressure-adjustable.
Application:
- Commercial Arts,
- Illustration,
- Photo Retouching,
- Hobby, and Crafts.
![]()
Extra Information
- For best results, use properly thinned paint and strain it when needed—fine nozzles don’t forgive lumps.
- A moisture trap (if not already included) is a smart add-on in humid conditions to keep water out of your paint.
- Always test spray on cardboard or scrap material before spraying your actual project.
Pro Tip
- Start with lower pressure and build up only as needed—most beginner issues come from too much pressure or paint that’s too thick, not from “needing more power”.
| Description | Specification |
| Power | 1/5 HP |
| Volts | 220 V / 50 Hz |
| Motor Speed | 1450 rpm |
| Capacity - delivery | 23 l/min |
| Weight | 3.6 kg |
| SIze (H x W x L) | 245 x 135 x 170 mm |
Safety
- Wear eye protection and appropriate respiratory protection when spraying paints and solvents.
- Use the kit in a well-ventilated area and keep overspray away from people, pets, and sensitive surfaces.
- Keep paints, thinners and vapours away from sparks, flames and ignition sources.
- Switch off and depressurise the system before changing hoses, fittings, or servicing the airbrush.
- Do not cover the compressor while running—allow airflow around it to prevent overheating.