TORK CRAFT 4 Flute Wood Boring Bit 12 X 400mm

Diameter: Ø12.0mm
Overall length: 400mm
Shank: 6.35mm hex for quick change

Application:

Use the 4 flute boring bit to drill into wood/timber.

A low rpm rotary drill with a planetary gearbox is required to be used with boring bits. It is possible to use a cordless drill, but in its lowest gear.

Benefits:

• The drill spurs have 4 cutting edges that leaves a cleaner and more precise bored hole.
• Using the same designed screw tip as from an auger drill bit - the 4 flute boring bit feeds itself.
• The shank can be clamped into a 6.35mm quick change chuck or a standard 3 jaw chuck. It also prevents slipping in a chuck.
• The edges of the bit have been hardened and remains sharper for longer.
• The flutes are designed to have excellent chip/shaving clearance.
• 4 cutting edges means faster cutting and more durability.
  

CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with both hands to prevent wrist injury.