Menu
Your Cart

Collets / Chuck

Brand: TORK CRAFT Model: TCMT001-2-3-3
Flexible shaft for TCMT001 rotary tool Collet diameter: Ø1.6mm Application: The collet is measured on the inside. There are three different collet sizes available. The collet size needs to correspond to the shaft diameter of the mini tool being used. A drill chuck (TCMT001DC) can also be u..
R 30.00
Ex Tax:R 26.09
Brand: TORK CRAFT Model: TCMT001-2-3-2
Flexible shaft for TCMT001 rotary tool Collet diameter: Ø2.3mm Application: The collet is measured on the inside. There are three different collet sizes available. The collet size needs to correspond to the shaft diameter of the mini tool being used. A drill chuck (TCMT001DC) can also be u..
R 30.00
Ex Tax:R 26.09
Brand: TORK CRAFT Model: TCMT001-2-3-1
Flexible shaft for TCMT001 rotary tool Collet diameter: Ø3.2mm Application: The collet is measured on the inside. There are three different collet sizes available. The collet size needs to correspond to the shaft diameter of the mini tool being used. A drill chuck (TCMT001DC) can also be u..
R 30.00
Ex Tax:R 26.09
Brand: PG Model: M8020
Collet set for thread 9/32 x 40 The collet set is used to hold the corresponding shank diameter. Collets included in the set: Ø 0.80mm Ø 2.35mm Ø 3.00mm Ø 3.20mm Collet nut included for 9/32 x 40 thread..
R 168.00
Ex Tax:R 146.09
Brand: PG Model: M8010
Collet set for thread 8 x 0.75 The collet set is used to hold the corresponding shank diameter. Collets included in the set: Ø 1.00mm Ø 1.50mm Ø 2.35mm Ø 3.00mm Ø 3.20mm Collet nut included for 8 x 0.75 thread..
R 196.00
Ex Tax:R 170.43
Brand: TORK CRAFT Model: TCMT001DC
Chuck for TCMT001 rotary tool Application: The chuck is used to replace the collet clamping system of the TCMT001 rotary tool. The clamping range is Ø0.3-3.2mm. TCMT001 accessories: TCMT001DC Drill chuck 0-3.2mm TCMT001FS Flexible shaft ..
R 120.00
Ex Tax:R 104.35
Brand: PG Model: M8560
Keyless chuck for thread 9/32 x 40 The keyless chuck is used to hold accessories with a shank diameter between Ø 0.4-3.2mm...
R 365.00
Ex Tax:R 317.39
Brand: PG Model: M8550
Keyless chuck for thread 8 x 0.75 The keyless chuck is used to hold accessories with a shank diameter between Ø 0.4-3.2mm...
R 351.00
Ex Tax:R 305.22
Brand: TORK CRAFT Model: TC08395
Collet wrench The collet wrench is used to securely tighten the collet nut or multi chuck, locking the mini rotary accessory in place. The back end of the wrench has a flat tip screwdriver that can be used to change accessories on the mini rotary mandrels...
R 10.00
Ex Tax:R 8.70
Brand: TORK CRAFT Model: TC08394
Multi chuck - Ø 0.8mm - 3.2mm The multi chuck is ideal for mini and micro drill bits, to secure hold different diameter accessories from Ø 0.8mm up to Ø 3.2mm..
R 80.00
Ex Tax:R 69.57
Brand: TORK CRAFT Model: TC08390
Quick change collet kit The quick change collet allows you to fit the following collet diameters: Ø 0.8mm Ø 1.6mm Ø 2.4mm Ø 3.2mm Make sure to tighten the collet nut with a collet wrench...
R 63.00
Ex Tax:R 54.78
Brand: TORK CRAFT Model: TC08391
Replacement collet - Ø 0.8mm The collet is used to hold mini rotary accessories with a shank diameter of Ø 0.8mm..
R 20.00
Ex Tax:R 17.39
Showing 1 to 12 of 14 (2 Pages)