Menu
Your Cart

LOCK MORTISING ATTACHMENT WITH 17MM CUTTER

LOCK MORTISING ATTACHMENT WITH 17MM CUTTER
LOCK MORTISING ATTACHMENT WITH 17MM CUTTER
R 4,824.00
Ex Tax: R 4,194.78
  • Stock: In Stock
  • Model: EG1
  • Weight: 3.00kg
  • Dimensions: 645.00mm x 245.00mm x 245.00mm
  • SKU: EG1
  • UPC: 6009600403680
Lock mortising attachment

Jig to be used with an electric drill to bore out a mortise to fit a door lock.

Application:

The jig is clamped onto a door to cut a mortise for the fitment of a door lock.

A drill is attached to the jig with the following requirements:

  • The chuck needs to be removed to expose the 20UNF thread.
  • The drill will be clamped on the collar (ø46mm).
  • The drill will be part of the jig and will thus be a semi-permanent addition.

The cutting length and depth of cut can be adjusted to comply with the demands of various door lock sizes. The standard cutter supplied with the jig is a Ø17mm.
 

We recommend using a drill with low speed torque. For example a rotary drill without percussion having 20 UNF thread.

Accessories and spare parts for the EG1:

  • Grub screw M6x12mm
  • Grub screw M6x25mm
  • Handle bent
  • Handle straight
  • Hook
  • Long guide pillar
  • Long link
  • Medium guide pillar
  • Set of bushes
  • Shaft with Ø17mm MAD bit
  • Shafts
  • Short connecting bar
  • Short guide pillar
  • Short link
  • Spare clamp bolt for clamp assembly
  • Spare pressure pad with pin for clamp assembly
  • Bushes long
  • Bushes short
  • Wood stand
  • Allen key 6mm
  • Bearings and bushes
  • Castings - end pieces
  • Casting  - middle piece
  • Casting - main body (H casting)
  • Clamp assembly
  • Clamp pad and bolt assebly
  • Drill jig

Cutters for the EG1:

  • Ø17mm cutter
  • Ø19mm cutter
  • Ø22mm cutter
  • Ø25mm cutter
  • Ø17mm MAD bit (shaft required for the MAD bit)
  • TCT Ø17.15mm cutter

Write a review

Note: HTML is not translated!
Bad Good
17 MM CUTTER FOR EG1
Out Of Stock
Cutter for EG1 This is a cutter for the EG1 lock mortising attachment PART NUMBER: EG2 DESCRIPTION: Cutter tip for EG1 SIZE: Ø17mm..
R 255.00
Ex Tax:R 221.74
19MM CUTTER FOR FOR EG1
Out Of Stock
Cutter for EG1 This is a cutter for the EG1 lock mortising attachment PART NUMBER: EG3 DESCRIPTION: Cutter tip for EG1 SIZE: Ø19mm..
R 282.00
Ex Tax:R 245.22
Cutter for EG1 This is a cutter for the EG1 lock mortising attachment PART NUMBER: EG4 DESCRIPTION: Cutter tip for EG1 SIZE: Ø22mm..
R 762.00
Ex Tax:R 662.61
Spare part for EG1 This is a spare part for the EG1 lock mortising attachment PART NUMBER: EG 10 DESCRIPTION: Clamp assembly (welded) for EG1..
R 1,946.00
Ex Tax:R 1,692.17
Tie on polishing wool buff Diameter: Ø250mm  Application: The polishing wool buff should be used with an automotive polisher. Different pol..
R 267.00
Ex Tax:R 232.17