TORK CRAFT Polishing And Compound Kit
R 266.00
Ex VAT: R 231.30
| Quantity | Unit Price | You Save |
|---|---|---|
| 5 or more | R 259.17 | 2.57 % |
| 10 or more | R 255.24 | 4.04 % |
| 20 or more | R 251.31 | 5.52 % |
- Stock: 827
- MPN: TC804901
- Weight: 0.39kg
- Dimensions: 310.00mm x 205.00mm x 50.00mm
- SKU: TC804901
- UPC: 6009675081370
For 30 or more items, click to quote
Polishing and compound kit
Application:
The kit includes a polishing buff and 5 solid polishing compounds. The compounds are used with various metals. It can be used to remove stretcher strains, orange peel, polishing wheel grit lines and light die marks etc.
TIP:
Spare polishing compound is available for the kit:
TC804904
How to use the compounds and the buffing pad:
- The adaptor is used to hold the buffing pad in the drill's chuck. Fasten the correct buffing pad in the adaptor./li>
- It would be best to use a drill press to polish metals. If a drill press is not accessable, use adaptor TCV01810 with a portable drill with a collar diameter of Ø43mm. Tighten the adaptor in the drill's chuck.
- The buffing pad should revolve towards you at full speed. Pass the compound lightly across the face of the buffing pad. To ensure that the compound is evenly spread, hold a clean piece of scrap metal against the face of the buffing pad. This will eliminate lumps of compound from occuring.
- If desired, heat the item to 65°C using an oven or a heater. Warming the metal keeps the compound on the buffing pad. A cool item will draw compound from the pad and leave deposits. Use a glove to handle the warm item.
- Hold the metal lightly against the buffing pad. Allow the compound to do the work.
- If more compound is required, apply it using a wiping motion. Do not overload the buffing pad.
