Menu
Your Cart

MINI PYRAMIDAL MANDREL 3.2MM SHANK

MINI PYRAMIDAL MANDREL 3.2MM SHANK
MINI PYRAMIDAL MANDREL 3.2MM SHANK
R 10.00
Ex Tax: R 8.70
  • Stock: In Stock
  • Model: TC08353
  • Weight: 0.02kg
  • Dimensions: 70.00mm x 18.00mm x 28.00mm
  • SKU: TC08353
  • UPC: 6009515847395
Pyramidal mandrel

The mandrel can be used with hard felt polishing accessories.

Simply tighten the pyramidal shaped screw in the hard felt accessory's predrilled centre hole.

QTY: 1

Fitting the tool bit

The shank of the rotary cutter is securely locked in place by fitting it in the corresponding collet or making use of a keyless chuck.

For improved engraving accuracy, make use of a flexible shaft connected to the rotary engraver.

Rotation speed:

Most rotary tools have the benefit to adjust the rotation speed. Many tool bits that fit in rotary tools have a maximum speed setting. This can normally be found on the packaging.

All materials react differently to speed and will need the tool bit to rotate slower. It is recommended to start using accessories on the slower speed first, before increasing the speed as needed.

The diameter of the tool bit fitted also determines the rotation speed. The larger the diameter, the slower the speed. If the speed is set too high, it could bend the shank/shaft resulting in injury.

consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection – clean and scratch free
  • Hearing protection – quality earmuffs
  • Dust masks – discard old and dirty masks
  • Gloves – for easy handling of material and hand protection
Wear Gloves Eye Protection Hearing Protection Dust Mask
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask
Specifications
Description Specification
Shank diameter Ø 3.2mm

 

Write a review

Note: HTML is not translated!
Bad Good
Screw type mandrel The mandrel can be used with rotary mini accessories designed for cutting/sawing, grinding and polishing applications. ..
R 51.00
Ex Tax:R 44.35
Reinforced screw type mandrel The mandrel can be used with rotary mini accessories designed for cutting/sawing, grinding and polishing ap..
R 13.00
Ex Tax:R 11.30
Pyramidal mandrel The mandrel can be used with hard felt polishing accessories. Simply tighten the pyramidal shaped screw in the hard felt..
R 49.00
Ex Tax:R 42.61
Tie on polishing wool buff Diameter: Ø250mm  Application: The polishing wool buff should be used with an automotive polisher. Different pol..
R 267.00
Ex Tax:R 232.17