Menu
Your Cart

MORTAR

MORTAR
Out Of Stock
MORTAR
R 344.00
Ex Tax: R 299.13
  • Stock: Out Of Stock
  • Model: RAW R-RPP-MORTAR
  • Weight: 0.50kg
  • Dimensions: 300.00mm x 50.00mm x 50.00mm
  • SKU: RAW R-RPP-MORTAR
  • UPC: 5906675348827
R-RPP-MORTAR Polyurethane Mortar

Polyurethane Thin Bed Mortar

  • Energy efficiency - reduction of heat escape by thermal bridges (λ ≤0,036)
  • Durability - high mechanical properties, elasticity, bonding strength
  • Effective yield - up to 12 square meters wall from one can
  • Extended construction season - application temperature up to -5C
  • Savings of money & time - quicker building works, less tools & materials
  • Easy & clean work - product ready to apply, no wastes, no dust, without lifting weights

Installation guide

Installation guide - R-RPP-MORTAR Polyurethane Mortar - 1 Installation guide - R-RPP-MORTAR Polyurethane Mortar - 2 Installation guide - R-RPP-MORTAR Polyurethane Mortar - 3 Installation guide - R-RPP-MORTAR Polyurethane Mortar - 4
Installation guide - R-RPP-MORTAR Polyurethane Mortar - 5 Installation guide - R-RPP-MORTAR Polyurethane Mortar - 6 Installation guide - R-RPP-MORTAR Polyurethane Mortar - 7 Installation guide - R-RPP-MORTAR Polyurethane Mortar - 8
  1. The first layer of the wall must be raised with the use of traditional mortar to accurately leveling the surface. Wear protective gloves. The working surfaces must be free of dust, debris and other materials that would impair the bond strength. Moisten the working surface with water, using a brush or spray. Shake can vigorously (30 sec).
  2. Optimal can temperature is +20°C. Application temperature from -5°C up to +30°C. Attach applicator gun and hold can upside-down during application.
  3. Apply the mortar with one bead in the middle of the block with a width of 12 cm or two parallel beads for blocks with a width exceeding 12 cm. Apply the mortar on the long side of the block keeping 3 cm distance from the side edge of the block forming bead with required diameter 3 cm for aerated concrete blocks or bead with required diameter 5 cm for hollow ceramic and silicate blocks. Blocks should be put on applied mortar up to 3 min after mortar application. Laid block should be pressed slightly in order to obtain thin slit evenly spread on the block surface. To achieve the desired accuracy position of the blocks should be leveled. Blocks can be horizontally corrected within 3 minutes by up to 0,5 cm without detaching them from the wall. Stabilize the blocks with a rubber hammer.
  4. Blocks cannot be removed from the wall. In case taking off the block required applying new lines of mortar. To eliminate thermal bridges and increase walls durability and resistance, mortar should be applied also on vertical surfaces of the blocks, in corners and connection between partition walls.
  5. In the event of a stoppage exceeding five minutes duration, wipe the nozzle with cleaner for foam applicator. After removing the applicator gun from the can, wipe down the nozzle and gun (internal and external surfaces) using a cleaner.

Features:

  • Energy efficiency - reduction of heat escape by thermal bridges (λ ≤0,036)
  • Durability - high mechanical properties, elasticity, bonding strength
  • Effective yield - up to 12 square meters wall from one can
  • Extended construction season - application temperature up to -5C
  • Savings of money & time - quicker building works, less tools & materials
  • Easy & clean work - product ready to apply, no wastes, no dust, without lifting weights

Applications

  • Ideal for detached houses, semi-detached houses & industrial buildings
  • Suitable for building internal and external walls
  • Dedicated both for load-bearing walls and partition walls
  • Suitable for blocks in TLMB dimensional class made from autoclaved aerated cellular concrete, ceramic hollow and silicate blocks, with appropriate solutions for this type of high dimensional tolerances

Base materials

Approved use in:

  • Aerated concrete in TLMB dimensional tolerance class
  • Ceramic hollow block
  • Silicate blocks

Technical Data

Parameter Value Methods
Application temperature [°C] 5÷30  
Can temperature [°C] 5÷30 (optimum 20)  
Adhesive coverage [m2] max. 12  
Colour - light grey  
Skin formation time [min] 5÷12 20°C, RH 50%
Open time [min] 3÷10 20°C, RH 50%
Complete hardening time [h] 24  
Water absorption after 24h [%] 0,3 PN-EN 1609:1999
Thermal resistance (upon hardening) [°C] -50÷90  
Thermal conductivity [W/mK] ≤0,036  
Dimensional stability - length [%] ±2  
Dimensional stability - width [%] ±2  
Dimensional stability - thickness [%] ±4  
Preparations solublity - Acetone, before hardening Cleaner RPC-0500
Density [kg/m3] 19÷23  
Volume [ml] 750  
Tensile strength [kPa] 200÷300 silicate brick
Tensile strength [kPa] 100÷200 ceramic hollow block
Tensile strength [kPa] 200÷400 aerated concrete block
Rawlplug's R-RPP-MORTAR Polyurethane Mortar

Write a review

Note: HTML is not translated!
Bad Good
TorkCraft - 10 Piece Hex Allen Key Set Carded:  Qty 10 Application: The TorkCraft Hex Allen Key set is made of high quality CrV steel, ..
R 88.00
Ex Tax:R 76.52
TorkCraft - 10 Piece Hex Allen Key Set On Key Ring Carded:  Qty 10 Application: The TorkCraft Hex Ball Point Allen Key set is made of..
R 68.00
Ex Tax:R 59.13
TorkCraft - 10 Piece Torx Key Set Carded:  Qty 10 Application: The TorkCraft Torx Allen Key set is made of high quality CrV steel, ..
R 140.00
Ex Tax:R 121.74
TorkCraft - 10 Piece Torx Security Key Set Carded:  Qty 10 Application: The TorkCraft Security Key set is made of high quality CrV stee..
R 150.00
Ex Tax:R 130.43
Nutsetter set with flexible shaft The set includes: Nutsetters: 5.5mm 6.0mm 7.0mm 8.0mm 10.0mm 12.0mm 13.0mm 25..
R 117.00
Ex Tax:R 101.74
TorkCraft - 18 Piece Combo Hex Key Set Carded:  Qty 18 Application: The TorkCraft 18 Piece Hex/Torx key combo set is made of CrV for ..
R 304.00
Ex Tax:R 264.35
R-RPP-45 Polyurethane Gun Foam Low-pressure, one-component polyurethane foam with applicator gun. Ideal for mounting, sealing and soundpr..
R 236.00
Ex Tax:R 205.22
R-RPP-65 High Yield Polyurethane Gun Foam Highly efficient, low-pressure, one-component polyurethane foam with applicator gun. Ideal fo..
R 303.00
Ex Tax:R 263.48