Menu
Your Cart

CHAIN SHARP. STONES 5.6X23MM.SH3MM.2PCS

CHAIN SHARP. STONES 5.6X23MM.SH3MM.2PCS
CHAIN SHARP. STONES 5.6X23MM.SH3MM.2PCS
R 119.00
Ex Tax: R 103.48
  • Stock: In Stock
  • Model: M2720
  • Weight: 0.02kg
  • Dimensions: 48.00mm x 18.00mm x 34.00mm
  • SKU: M2720
  • UPC: 8011017090665
Chainsaw sharpening stone - Ø 5.6mm

The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutting corner on a chainsaw blade.

Simply colour-in the side plate's bevel with a permanent marker and align the sharpening stone with the bevel and only remove the coloured in areas to reveal a new sharp edge.

QTY: 2

The chainsaw blade shouldn't be sharpened when the raker (depth gauge) is higher than the tooth's cutting corner.

Fitting the tool bit

The shank of the tool bit is securely locked in place by fitting it in the corresponding collet or making use of a keyless chuck.

For improved sharpening accuracy, make use of a flexible shaft connected to the rotary engraver.

Rotation speed:

Most rotary tools have the benefit to adjust the rotation speed. Many tool bits that fit in rotary tools have a maximum speed setting. This can be found on the packaging.

All materials react differently to speed and will need the tool bit to rotate slower. It is recommended to start using accessories on the slower speed first, before increasing the speed as needed.

The diameter of the tool bit fitted also determines the rotation speed. The larger the diameter, the slower the speed. If the speed is set too high, it could bend the shank/shaft resulting in injury.

consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection – clean and scratch free
  • Hearing protection – quality earmuffs
  • Dust masks – discard old and dirty masks
  • Gloves – for easy handling of material and hand protection
Wear Gloves Eye Protection Hearing Protection Dust Mask
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask
Specifications
Description Specification
Grinding stone diameter Ø 5.6mm
Stone length 21mm
Shank diameter Ø 3mm
Abrasive Bonded Crystalline Aluminium Oxide (Corundum)

 

Write a review

Note: HTML is not translated!
Bad Good
Chainsaw sharpening stone - Ø 4.8mm The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutting..
R 119.00
Ex Tax:R 103.48
Chainsaw sharpening stone - Ø 4mm The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutting c..
R 119.00
Ex Tax:R 103.48
Chainsaw sharpening stone - Ø 4mm The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutting..
R 15.00
Ex Tax:R 13.04
Chainsaw sharpening stone - Ø 4.8mm The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutti..
R 15.00
Ex Tax:R 13.04
Chainsaw sharpening stone - Ø 5.6mm The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutti..
R 15.00
Ex Tax:R 13.04