Menu
Your Cart
DISCLAIMER | ONLINE PRICING: Please note that the pricing displayed online is for online purchases only. Pricing and availability of stock may vary in store.

45 POLYURETHANE GUN FOAM

45 POLYURETHANE GUN FOAM
45 POLYURETHANE GUN FOAM
R 172.73
Ex Tax: R 150.20
  • Stock: In Stock
  • Model: RAW R-RPP-45
  • SKU: RAW R-RPP-45
  • UPC: 590667528499
R-RPP-45 Polyurethane Gun Foam

Low-pressure, one-component polyurethane foam with applicator gun.

  • Ideal for mounting, sealing and soundproofing.
  • Excellent sound and thermal insulation properties.
  • Extremely rapid curing – workable 40 minutes after optimum application.
  • Resistant to mould and fungi.

 

Installation guide

Installation guide - R-RPP-65 High Yield Polyurethane Gun Foam - 1 Installation guide - R-RPP-65 High Yield Polyurethane Gun Foam - 2 Installation guide - R-RPP-65 High Yield Polyurethane Gun Foam - 3
Installation guide - R-RPP-65 High Yield Polyurethane Gun Foam - 4 Installation guide - R-RPP-65 High Yield Polyurethane Gun Foam - 5 Installation guide - R-RPP-65 High Yield Polyurethane Gun Foam - 6
  1. Wear protective gloves. Ensure surfaces are free from dust, dirt or debris.
  2. Before using, make sure that the can temperature is above zero (optimum +20°C). Application temperature from +5°C up to +30°C.
  3. Shake can vigorously for 30 seconds to mix properly components.
  4. Screw gun onto the can. Hold can upside-down during application.
  5. Moisten surfaces with water prior to application.
  6. Fill gaps from down to up, zigzag motion, alternating from one wall to the other. Fill gaps to approximately 60 % volume. Max. wide of the gap 3-4 cm. Wider gaps should be applied after hardening of the previous layer. Each layer should be moistened with water using a spray.
  7. Once fully hardened, foam must be protected from UV exposure by coating with plaster, paint, acrylic or silicone.
  8. In the event of a stoppage exceeding five minutes duration, wipe the nozzle with cleaner for foam applicator.
  9. After removing the applicator gun from the can, wipe down the nozzle and gun (internal and external surfaces) using a cleaner.

Features and benefits

  • Ideal for mounting, sealing and soundproofing.
  • Excellent sound and thermal insulation properties.
  • Extremely rapid curing – workable 40 minutes after optimum application.
  • Resistant to mould and fungi.

Applications

  • Fixing (for installation of doors and windows)
  • Thermal insulation of plumbing and central heating
  • Thermal insulation of roofing (including flat roofs)
  • Installation & sealing of window sills
  • Filling gaps in the thermal insulation of buildings
  • Filling frame structures

Base material

Wood Stainless steel Structural Steel
Wood Stainless steel Structural Steel

Other materials

Aerated Concrete Block Ceramics Chipboard Concrete
Aerated Concrete Block Ceramics Chipboard Concrete
Glass Hollow Brick Hollow Sand-lime Brick Natural Stone
Glass Hollow Brick Hollow Sand-lime Brick Natural Stone
Plasterboard Plastic Plywood Solid Brick
Plasterboard Plastic Plywood Solid Brick

Technical Data

Parameter Value Methods
Efficiency [dm3] max. 45  
Density(kg/dm3) - 17-21 PN-EN ISO 845:2000
Soundproofing coefficient [dB] 61 EN 12354-3
Application temperature [°C] +5 ÷ +30  
Can temperature [°C] +20  
Colour - Light yellow  
Post-expansion [%] 120  
Skin formation time [min] 4÷7 20°C, RH 90%
Pretreatment time [min] 45 20°C, RH 90%
Complete hardening time [h] 24  
Fire resistance class - B3 DIN 4102
Dimensional stability [%] 1.2 - 3 40°C, RH 95%, 24 hrs
Water absorption after 24h [kg/m3] 1 PN-EN 1609:1999
Tensile strength [kPa] ≥ 100 PN-EN 1607:1999
Compressive strength [kPa] ≥ 40 PN-EN 826:1998
Thermal resistance (upon hardening) [°C] -50 ÷ +90  
Thermal conductivity [W/mK] 0,038  
Preparations solublity - Acetone, before hardening Cleaner RPC-0500
Volume [ml] 750  

Write a review

Note: HTML is not translated!
Bad Good